INTERACTIVE LED UPS MODEL VI 2000; POWER: 2000VA / 1200W
PowerWalker VI 2000 is an intelligant and compact Line-Interactive UPS System, provides High performance, reliable and cost-effective backup power protection.
■ Compact size and light weight design
■ Utilized microprocessor control
■ Equiped with built-in boost
■ Cold start capability
■ Include discharge, overcharge and overload protection
■ Provides advanced telephone/fax or modem surge suppression protection
The UPS is equipped advanced microprocessor controled and included built-in boost and buck AVR to prevent the equipment damage and data loss. PowerWalker VI series protects computer systems, servers, storage systems and network peripherals from blackouts, power surges and spikes.
Capacity
VA / W: 2000VA / 1200W
Input
Voltage: 110/120VAC or 220/230/240VAC
Voltage Range: 166- 280VAC
Frequancy: 50/ 60Hz
Output
Voltage (Batt. Mode): 220/230/240VAC
Frequncy (Batt. Mode): 50Hz or 60Hz +/- 1Hz
Output Waveform (Batt. Mode): Modified Sine Wave
Battery
Battery Type: 2 x 12V/9AH
Backup Time (at 2 PC load with 15" monitor): 25 Minutes
Recharge Time: 10 hours to 90% after complete discharge
Transfer Time: 4-8ms (typical)
Indicator
AC Mode: 1stgreenLED ist lighting, 2nd to 5th green LEDs lighting indicating load level
Backup Mode: 1st green LED flashing, 2nd to 5th green LED lighting indicating battery capacity
Fault: Red LEDlighting
Audible Alarm
Backup Mode: Sounding every10 seconds
Low Battery: Sounding every second
Overload: Sounding every 0.5 second
Fault: Continuously Sounding
Full Protection: Overcharge and overload protection
Physical
Dimension D x W x H (mm): 405 x 145 x 205
Weight (kgs): 9.77
Environment
Operating Environment: 0-40°C, 0-90% relative humidity (non-condensing)
Noise Level: Less than 50dB
Interface
Smart RS-232 Windows family, Sun Solaris, IBM AIX, Compaq True64, UnixWare, Free BSD, HP-UX, Linux and MAC
USB Windowsfamily and MAC
AVAILABILITY ON DEMAND
